How to Repair a Broken Laptop Screen?–Laptop Screen Repair Guide

Laptops are prone to damage, from accidentally dropping to everyday wear and tear! If it accidentally slipped from your hand, then the damage is most seen on its screen. You can see stuck or incorrectly colored pixels, lines of color, a black screen, and more! However, taking it to a professional cell phone repair shop is expensive. So even though 90% of the time you need to get the screen replaced by professionals; however, you can try these fixes first. Gather your tools, and let’s get on with the guide of the laptop screen repair process.

Note: The intention of this guide is for informational purposes only, and proceeding with any repair is at your own risk.

Broken Laptop Screen

What Other Issues Cause Cracks on the Laptop Screen?

Before undertaking any laptop screen repair process, you must understand that a laptop screen does not only crack due to physical damage. Its screen can crack due to a lot of reasons, such as–

  • Uneven or excessive pressure – Pushing or pulling the laptop lid abruptly and placing heavy objects on your laptop.
  • Manufacturing flaws – If there are manufacturing defects or weaknesses in the laptop screen’s materials.
  • Fluctuating temperature – Placing your laptop near a hot radiator or putting it in a cold environment.
  • Humidity and moisture – Moisture can build inside your laptop, causing its internal components to expand, which will cause internal pressure against the screen.
  • Natural wear and tear – Over time, minor issues can prolong for a long time, causing the screen to crack.

How to Repair the Screen of a Laptop?

Without any further ado, let’s begin the repairing process–

Step 1: Diagnose the Issue

Before you start to repair your broken laptop screen, first assess the extent of the damage. Laptop screen damage can range from a shattered display to dead pixels or other display issues. 

Follow these simple processes to diagnose the problem with your laptop screen–

  • Before starting anything, connect your laptop to an external monitor. Doing this step will help you confirm whether the problem lies in the laptop’s display or internal components.
  • Now, inspect your laptop for visible signs of damage like cracks, discolored areas, or dark spots on the screen. If you notice any of these signs, your laptop screen needs replacement.

Step 2: Gather Your Tools

If you want to start fixing the broken laptop screen, you need to be ready with these essential tools–

  • 1 Phillips-head screwdriver 
  • 1 small flat-head screwdriver 
  • 1 new laptop screen (make sure it is compatible with your laptop model)
  • 1 microfiber towel 

Step 3: Disconnect and Turn Off Your Laptop

Before starting:

  • Disconnect your laptop from the power source.
  • See if you’ve turned off your laptop completely.
  • Check if your laptop and USB are connected. If it is, unplug them. 

Step 4: Remove the Laptop’s Screen Bezel

Now, locate the screws that hold the screen bezels. Remember, screen bezels are the plastic frame around the screen. So, use a screwdriver with a flat tip (i.e., small flat-head screwdriver) to raise the protective cover. Next, use the Phillips-head screwdriver to remove the screws. Now, use your fingers to separate the border from the screen carefully. Do not push too hard because it may break or harm the holder of the bezel.

Step 5: Remove the Broken Screen

Once you’ve removed the bezel, you should see the screws holding the broken screen in place. For this step, again, take the Phillips-head screwdriver and unscrew them. Now, gently lift the broken screen away from the laptop. And ensure that you identify and disconnect any cables attached to the screen. These cables can be video cables and backlight cables.

Step 6: Install the New Screen

Place the new screen in the same position as the old one, aligning the screw holes. Connect the cables you had removed from the old screen earlier. Once you make all the connections, secure the new screen in place with the screws you removed earlier.

Step 7: Reattach the Screen Bezel

Now, carefully place the screen bezel back in position. See if it aligns properly with the laptop’s body. You can also press it gently to snap the clips back into place. Further, ensure to replace the bezel screws and reattach the small rubber covers to conceal them.

Step 8: Test Your New Screen

Well, here comes the final step!

Finally, power the laptop’s battery inside to see if the new screen works correctly. 

If everything is functioning as expected, congratulations! You’ve successfully repaired your broken laptop screen.

If it’s not functioning properly, schedule a consultation with laptop screen repair professionals. They can assess the laptop screen and repair it in no time. 

How Much Does It Cost to Repair a Laptop Screen?

It all comes down to your laptop’s model. However, if we talk about a rough estimate, it will cost around $200 to $300 depending on the labor (professional laptop technicians) and screen price. However, it will cost $100 if you repair the laptop screen yourself. 

Final Thoughts

Did you find cracked laptop screen repair manageable? Then, you must’ve exactly followed our guide. Bravo! You just saved yourself $200. However, if you can’t conquer this intricate task, then it’s okay. You can hire a professional and certified repair technician who is more familiar with your laptop’s brand and model. You can also remember them for cell phone repair, tablet screen repair, and more!

Chris is a freelance journalist with huge interest in technology, science, life hacks and health. He loves coffee, cheesecake and chess. Drop a line in comments to leave feedback for him.